[j-nsp] Single RE-S-X6-64G with "error: Unrecognized command (chassis-control)"

[Dave Peters - Terabit Systems]

Hi all--

Forgive my ignorance, but I've got an RE-S-X6-64G running in an MX480 (BP3) with an SCBE2, version 15.1R6.7, and it has a chassis-control problem:

root> show chassis environment
error: Unrecognized command (chassis-control)

root> show chassis hardware
error: Unrecognized command (chassis-control)

. . . etc.

The show version command indicates "Model: olive," which leads me to believe I've got a bad/wrong version, but Juniper's website says I'm good to go: https://www.juniper.net/documentation/en_US/release-independent/junos/topics/reference/general/routing-engine-m-mx-t-series-support-by-chassis.html#sec-mx480-res

And trying to restart chassis-control isn't working. I'm sure I'm missing something simple. Can anyone point me in the right direction?

Much appreciated.

--Dave Peters
_______________________________________________
juniper-nsp mailing list juniper-***@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp

[Olivier Benghozi]

Hi Dave,
As this RE is not supported in 15.1R this seems legit, so I suppose you'd better install the last 16.1R (as the end of engineering for 15.1 is in 4 months anyway).

Post by Dave Peters - Terabit Systems
The show version command indicates "Model: olive," which leads me to believe I've got a bad/wrong version, but Juniper's website says I'm good to go

No you're not: 15.1F is not 15.1R.


Olivier

_______________________________________________
juniper-nsp mailing list juniper-***@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp

[Aaron Gould]

Olive? Are you sure you aren't in a GNS3-based virtual environment router?
I've never seen mention of olive outside of GNS3/Virtual Environment.
Perhaps, this is a learning opportunity from me. Please let me know if
there are times when actually hardware routers show Junos as "olive"

Here's my GNS3 routers...i have the same chassis-control error, and I forget
what it means. I have wondered if I never really set up my olive/vmx
environment completely correct. Also, someone told me that even though I
installed vMX 15.1F3, since it was an early release of vMX, that it still
shows up as "olive" and that if I were to download a newer version of vMX,
that it would no longer show olive. I haven't verified that yet though.

Here's 2 of my gns3-based juniper routers...

***@R6-j> show chassis environment
error: Unrecognized command (chassis-control)

***@R6-j> show version
Hostname: R6-j
Model: olive
JUNOS Base OS boot [12.1R1.9]
...

***@vMX_1001> show chassis environment
error: Unrecognized command (chassis-control)

***@vMX_1001> show version
Hostname: vMX_1001
Model: olive
Junos: 15.1F3.11
...



-Aaron


_______________________________________________
juniper-nsp mailing list juniper-***@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp

[Olivier Benghozi]

Since you create an Olive from an M/MX/T release, you know that Junos declares itself an "Olive" if it doesn't recognise a Juniper hardware it knows (well, except for vMX/vSRX/vRR/vWhatever, even if there was a bug in older releases where it nevertheless showed Olive).

Additionally, RE-S-X6-64G IS a virtualised environnement, where Junos runs inside a VM on a Linux host.
Reference:
https://kb.juniper.net/resources/sites/CUSTOMERSERVICE/content/live/TECHNOTES/0/TN303/en_US/NextGenRoutingEngine_Tech_Intro.pdf <https://kb.juniper.net/resources/sites/CUSTOMERSERVICE/content/live/TECHNOTES/0/TN303/en_US/NextGenRoutingEngine_Tech_Intro.pdf>

The fact is that 15.1R has no support for this config.

Post by Aaron Gould
I've never seen mention of olive outside of GNS3/Virtual Environment.
Perhaps, this is a learning opportunity from me. Please let me know if
there are times when actually hardware routers show Junos as "olive"

_______________________________________________
juniper-nsp mailing list juniper-***@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp

[Matthew Crocker]

I'm running mine on


-Matt

--
Matthew Crocker
Crocker Communications, Inc.
President
On 2/12/18, 5:41 PM, "juniper-nsp on behalf of Dave Peters - Terabit Systems" <juniper-nsp-***@puck.nether.net on behalf of ***@terabitsystems.com> wrote:

Hi all--

Forgive my ignorance, but I've got an RE-S-X6-64G running in an MX480 (BP3) with an SCBE2, version 15.1R6.7, and it has a chassis-control problem:

root> show chassis environment
error: Unrecognized command (chassis-control)

root> show chassis hardware
error: Unrecognized command (chassis-control)

. . . etc.

The show version command indicates "Model: olive," which leads me to believe I've got a bad/wrong version, but Juniper's website says I'm good to go: https://www.juniper.net/documentation/en_US/release-independent/junos/topics/reference/general/routing-engine-m-mx-t-series-support-by-chassis.html#sec-mx480-res

And trying to restart chassis-control isn't working. I'm sure I'm missing something simple. Can anyone point me in the right direction?

Much appreciated.

--Dave Peters
_______________________________________________
juniper-nsp mailing list juniper-***@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp


_______________________________________________
juniper-nsp mailing list juniper-***@puck.nether.net
https://puck.nether.net/mailman/lis

[Matthew Crocker]

I'm running mine on: I belive you need 15.1F. for the new REs to boot properly

Model: mx480
Junos: 15.1F6-S6.4

Routing Engine 0 REV 15 750-054758 CAGK8028 RE-S-2X00x6
Routing Engine 1 REV 15 750-054758 CAGK8034 RE-S-2X00x6
Routing Engine status:
Slot 0:
Current state Backup
Election priority Master
Temperature 29 degrees C / 84 degrees F
CPU temperature 41 degrees C / 105 degrees F
DRAM 49117 MB (49152 MB installed)
Memory utilization 5 percent
5 sec CPU utilization:
User 0 percent
Background 0 percent
Kernel 0 percent
Interrupt 0 percent
Idle 100 percent
Model RE-S-2X00x6

Routing Engine status:
Slot 1:
Current state Master
Election priority Backup
Temperature 29 degrees C / 84 degrees F
CPU temperature 40 degrees C / 104 degrees F
DRAM 49117 MB (49152 MB installed)
Memory utilization 5 percent
5 sec CPU utilization:
User 0 percent
Background 0 percent
Kernel 1 percent
Interrupt 0 percent
Idle 99 percent
Model RE-S-2X00x6


-Matt

--
Matthew Crocker
Crocker Communications, Inc.
President
On 2/12/18, 5:41 PM, "juniper-nsp on behalf of Dave Peters - Terabit Systems" <juniper-nsp-***@puck.nether.net on behalf of ***@terabitsystems.com> wrote:

Hi all--

Forgive my ignorance, but I've got an RE-S-X6-64G running in an MX480 (BP3) with an SCBE2, version 15.1R6.7, and it has a chassis-control problem:

root> show chassis environment
error: Unrecognized command (chassis-control)

root> show chassis hardware
error: Unrecognized command (chassis-control)

. . . etc.

The show version command indicates "Model: olive," which leads me to believe I've got a bad/wrong version, but Juniper's website says I'm good to go: https://www.juniper.net/documentation/en_US/release-independent/junos/topics/reference/general/routing-engine-m-mx-t-series-support-by-chassis.html#sec-mx480-res

And trying to restart chassis-control isn't working. I'm sure I'm missing something simple. Can anyone point me in the right direction?

Much appreciated.

--Dave Peters
_______________________________________________
juniper-nsp mailing list juniper-***@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp


_______________________________________________
juniper-nsp mailing list juniper-***@puck.nether.net
https://puck.nether.net/mailman/listinfo/junip