[j-nsp] SRX300

[Mohammad Khalil]

Dears
I have a new Juniper SRX300
I have downloaded the driver for it (mini USB) and tried to access ti via
console with no luck
The console shows connected but nothing appears on the terminal
Tried to disable flow control and the same
Am using Putty

Any advice ?!
_______________________________________________
juniper-nsp mailing list juniper-***@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp

[Ola Thoresen]

I believe the usb console is disabled by default, and you need to use a
regular (rs232) console cable for the initial configuration. At least it
was set up that way in earlier releases.
You can then enable the USB console in the configuration.

Post by Mohammad Khalil
Dears
I have a new Juniper SRX300
I have downloaded the driver for it (mini USB) and tried to access ti via
console with no luck
The console shows connected but nothing appears on the terminal
Tried to disable flow control and the same
Am using Putty
Any advice ?!
_______________________________________________
https://puck.nether.net/mailman/listinfo/juniper-nsp

_______________________________________________
juniper-nsp mailing list juniper-***@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp